Affichage des articles dont le libellé est Richeson Baby Press. Afficher tous les articles
Affichage des articles dont le libellé est Richeson Baby Press. Afficher tous les articles

samedi 16 février 2013

"Le chat", a dry point intaglio print and its monotype variants

Le chat (6.75 x 5 inches /17 x 13 cm), a dry point intaglio print on plexiglas (Plaskolite 050) plate.

Using traditional dry point needles, nails and roulette, I drew the image freely, without the use of a preliminary sketch, somewhat inspired by a small monotype that I did a while back, and my cat.    I printed on 11 x 7.5 inches/28 x 19 cm paper, which was wet beforehand.   All inks used are oil based etching inks.

A first print was pulled with dry point inking only, and subsequent variant monotype prints were pulled with à la poupée colour inking and wiping. 


 Dry point only with black ink on BFK paper.

Variant print with dry point black inking and à la poupée yellow ocre inking on same plate, on BFK paper.

Variant print with dry point black inking and à la poupée red inking on same plate, on BFK paper.
Variant print with dry point black inking and à la poupée red and blue inking on same plate, on hot press Somerset paper.

Variant print with dry point black inking and à la poupée red and blue inking on same plate, on handmade paper.   You will notice that the print on this handmade paper is much more subdued.

Also, as with all dry points, with each additional inking and pull of the print, the burr of the dry point wears off, and there is less intensity in the black dry point lines.


These prints were all printed in my studio on my new Richeson Baby Press.

jeudi 14 février 2013

Richeson Baby Press, ma nouvelle acquisition pour l'estampe

Ma toute dernière acquisition pour travailler la taille-douce dans mon atelier, un "Richeson Baby Press".  Elle m'a été recommandée par Anna McIntyre avec laquelle j'ai débuté tout récemment un Atelier de gravure créative au Centre des Arts Visuels.

Toute petite, mais très efficace pour l'impression en taille-douce, elle prend place dans un coin de mon atelier.  


J'ai fait mes premiers essais avec la pointe sèche sur plexiglas, avec encrage en noir avec encre à l'eau-forte et papier BFK.  La pression est excellente.


J'ai par la suite retravaillé la même plaque en pointe-sèche et monotype, avec le noir pour la pointe sèche et l'ajout d'encres à eau-forte de couleur appliquées à la poupée pour le monotype.




 Un autre essai avec le noir et deux couleurs.





La presse pèse 70 livres et est très facile à installer.  J'utilise trois langes, soit le Catcher, le Cushion Blanket (qui vient avec la presse) et le Pusher Blanket.  Elle prend le papier d'impression jusqu'à 9½ x 18 pouces.

J'ai acheté la presse à l'Avenue des Arts, au 328 avenue Victoria, juste à coté du Centre des Arts Visuels à Westmount.